Packard Bell Recovery

  • Standard Service (2 - 3 Days) - £249
  • Express Service (2 Days) - £495
  • Critical Service (1 Day) - £895
Packard Bell Recovery
Chat with us
Monday-Friday: 9am-6pm

Failures Commonly Experienced by Packard Bell PC Hard Drives:

When a Packard Bell PC hard drive failure occurs it can fail for a variety of reasons, it is vital that the fault is diagnosed correctly by a Packard Bell professional data recovery specialist in order that the data on the PC drive can be recovered. There are a number of signs that your PC hard disk drive may be close to experiencing failure, including a blue crash screen, clicking or grinding noises and a lower level of performance or hard drive is not getting recognised when PC boots up. If any of these symptoms are experienced, the best course of action is to turn off the PC and contact a professional data recovery service. By turning off a computer immediately upon experiencing warning signs, you’ll increase your chances that your data can be completely recovered. Packard Bell PC Hard Drive’s can fail for a variety of reasons, below is the most common Packard Bell PC drive failure types we receive in for data recovery:

Packard Bell PC Hard Drive Mechanical Failure:

This type of failure is normally the result of the Packard Bell PC hard disk making beeping, buzzing or clicking noises. Beeping and buzzing noise is normally an indication that the motor has failed on the hard disk. A clicking noise is normally an indication that the read/write heads have failed. This failure is normally the result of the PC hard drive getting a knock or a fall. We have a high success rate with recovering data from clicking Packard Bell PC HDD’s.

Packard Bell PC Hard Drive Electronic Failure:

This type of failure is normally the result of a power surge or power spike. We have a high success rate with recovering data from dead Packard Bell PC HDD’s.

Packard Bell PC Firmware Failures:

Firmware is a software program that is responsible for the communication between the entire computer system and the hard disk drive. Firmware codes are typically located on disk platters, and if the platter becomes damaged or corrupted, the hard disk drive will experience a failure. This type of failure occurs even if the other mechanical and electrical components of the PC hard drive are in perfect working order. We have a high success rate with recovering data from corrupted firmware Packard Bell PC HDD’s.

Packard Bell PC Hard Drive is Operating Very Slowly or Freezing:

This type of failure means the Packard Bell PC hard drive is degrading. In most circumstances it means the sectors on the disk are getting corrupt and unreadable and unwritable. It can also mean that bad sectors on the hard drive are not getting allocated by the hard drive correctly. With this type of failure a client can normally not copy data from the drive or files and folders keeps appearing and then disappearing from view. We have a high success rate with recovering data from corrupted & bad sector Packard Bell PC HDD’s.

Contact Us

Tell us about your issue and we'll get back to you.